What an imperial table is and when it works
An imperial table, also sold as feasting tables, is one long table made of rectangles placed end to end, with guests on both sides and, if you like, at the ends. Think harvest suppers and family-style dining: everyone at one table, sharing platters down the middle and plenty of conversation.
- Good fit for a long, narrow room, for a small wedding where most guests know each other, or if you want to eat among your guests with no top table.
- Harder when some relatives don’t get on, when you have many groups who don’t know each other, or in a square room, where a few round tables use the space better.
Rectangular table sizes and how many round tables you need are on the wedding table calculator. This guide covers what the calculator doesn’t: how people sit along the table.
How many guests fit at a long banquet table
You fit about 3 guests per 180 cm (6 ft) of table on each side, or roughly 60 cm (2 ft) per person, plus 2 more if you use the ends. At 70 cm per person everyone has more elbow room, especially with upholstered chairs.
| 180 cm tables | Length | On the sides | With the ends |
|---|---|---|---|
| 2 | 3.6 m (12 ft) | 12 | 14 |
| 3 | 5.4 m (18 ft) | 18 | 20 |
| 4 | 7.2 m (24 ft) | 24 | 26 |
| 5 | 9 m (30 ft) | 30 | 32 |
| 7 | 12.6 m (42 ft) | 42 | 44 |
| 10 | 18 m (60 ft) | 60 | 62 |
Standard rectangular tables are 75–80 cm (30 in) wide. For a wedding imperial table, ask for 90–100 cm (36–40 in): with centrepieces and sharing platters, 75 cm feels cramped and you’ll knock knees with the person opposite.
How much room an imperial table needs
One row needs a room about 4 m (13 ft) wide: 1 m of table plus roughly 1.5 m on each side for pulled-out chairs and serving staff. For the length, add about 1.5 m at each end to the length of the table.
| Layout | Guests | Room width | Room length |
|---|---|---|---|
| 1 row | 30 | 4 m (13 ft) | 12 m (40 ft) |
| 2 parallel rows | 60 | 6.5 m (21 ft) | 12 m (40 ft) |
| 3 parallel rows | 90 | 9 m (30 ft) | 12 m (40 ft) |
The surprise: a single long table doesn’t save space. 30 guests in 48 m² is 1.6 m² per person, more than the 1.1–1.4 m² of round tables. The saving comes when several rows share aisles: with three, you’re down to 1.2 m². Treat these as starting figures and ask the venue for its floor plan.
With more than one row there are three common layouts: parallel rows down the room; a U shape, which works up to about 40 or 50 guests with the couple at the base, or a comb, with the couple’s table across the top and the long tables running from it into the room.
Where the couple sit at an imperial table
Most couples sit in the middle of one long side, facing the room or the entrance. Everyone can see you, you hear the speeches from both ends and your conversation reaches halfway down the table on both sides.
- Middle of a long side: the centre becomes your top table without being one. Parents or the best man and maid of honour opposite you, grandparents or siblings beside you. It keeps you closest to everyone.
- At one end: looks great in photos and everyone faces you down the table, but you only talk to two to four people and the far end is a long way off. Fine for a short table of 20 guests or fewer.
- At a cross table (comb or T shape): brings back some of the top table. It’s the choice for 60 guests or more, when you need more than one row.
If you’re torn between a traditional top table, a sweetheart table and sitting among your guests, the seat-by-seat order is in the top table guide.
Who faces whom: families, couples and table ends
At a long table each guest talks to about five people: the two beside them and the three opposite. So fill the table outwards from the couple and check that everyone knows at least one of those five.
-
Number the chairs
Draw the table with both sides, for example A1–A15 and B1–B15, and the ends separately. Working with numbers stops you forgetting the chairs at the far end.
-
Place the couple and who faces you
The couple in the middle of one side; parents or your closest friends on the other side, opposite you. If parents are divorced, seat them opposite you but not side by side.
-
Fill outwards by closeness
Grandparents and siblings first, then aunts, uncles and godparents, then cousins and friends, and finally work friends and plus-ones you barely know. The further from the couple, the less close.
-
Mix the families across the table
If the two families get on, seat them facing each other: the bride’s aunts and uncles opposite the groom’s. If not, give each family one half of the table, either side of the couple, with friends where the halves meet.
-
Use the ends well
End seats only talk to two or three neighbours: they suit a group of friends who already know each other, grandparents who want some peace, or a wheelchair user, who gets clear space there.
-
Check everyone’s five people
Seat by seat, look at who is beside and opposite. A guest who knows nobody in that group will spend the whole meal quiet, even if the table is full of people they know.
Children near an end and an exit, with their parents next to them. Older guests near the middle but on the aisle side, not boxed in against a wall. To split your list into blocks of 6 before you lay out the table, the seating chart generator groups guests without splitting families: each table it suggests becomes a stretch of three a side.
Imperial table or round tables
Neither always wins: long tables are better for atmosphere and narrow rooms, and round tables are better when you have many groups who won’t mix.
| Imperial table | Round tables | |
|---|---|---|
| Feel | Family meal, everyone together | Separate groups, more formal |
| Conversation | With about five neighbours | With the whole table (8 to 10 people) |
| Room that suits it | Long and narrow | Square or wide |
| Space | Saves space with several rows | 1.1–1.4 m² per guest |
| Seating order | Every chair matters | Choosing the table is enough |
| Relatives who don’t get on | Hard to separate | Easy: different tables |
You can also mix them: one long table for family in the middle and round tables for friends. Printable round and long-table charts are in the seating plan templates, and the whole process, from guest list to signs, is in how to do a wedding seating plan.
Frequently asked questions
How many people fit at an imperial table?
About 3 guests per 180 cm (6 ft) table on each side, at 60 cm per person. Five 180 cm tables make 9 m (30 ft) and seat 30 people, 15 per side, or 32 with one at each end.
How wide should a long banquet table be for a wedding?
Ideally 90 to 100 cm (36 to 40 in). Standard 75 to 80 cm rectangular tables feel tight once there are centrepieces and sharing platters down the middle.
How much room does a long banquet table need?
About 4 m (13 ft) of width for one row: 1 m of table and roughly 1.5 m each side for chairs and staff. For the length, the table plus about 1.5 m at each end. A 9 m table needs a room of about 4 by 12 m.
Where should the couple sit at a long table?
Usually in the middle of one long side, facing the room, with parents or close friends opposite. An end seat only works well on a short table, because conversation doesn’t reach the far end.
Do you need a top table with feasting tables?
No. The middle of the long table works as the top table: the couple in the centre and close family around them. With more than 60 guests and several rows, a cross table for the couple helps organise the room.